ONGA SILENTFLO SERIES POOL PUMP
The SilentFlo range of pool pumps meets the latest issues in the pool industry – noise levels and efficiency – these pumps are at the top of the list for quietness and efficiency to minimize the cost of operation and maximize the enjoyment of pool ownership.
APPLICATIONS:
- Swimming pools from 20,000 litres up to 130,000 litres.
- High quality pools where quiet operation is a must.
- Pools where high efficiency is required .
FEATURES & BENEFITS
- Extremely quiet hydraulic design enabling you to run this pump at night, without disturbing the neighbors,
- Extremely efficient hydraulic design which minimizes running costs.
- Elevated base – further dampens sound and vibration, and keeps the pump above sitting water, minimizing
- Stainless Steel motor shaft extends the life of the pump by reducing corrosion.
- P55 (TEFC) motor – with IP55 protection from dust and water the SilentFlo pumps are preserved against
- Large volume strainer basket minimizes the maintenance requirement by extending the time between strainer
- Included 50mm barrel unions making it quick and easy to install while allowing pump removal without flexing
- Dual connections: 50mm thread or 50mm barrel unions allows piping flexibility – threaded connections allow
- Thermoplastic casing and hydraulic parts provide total corrosion resistance for long life and peace of mind.
- The SilentFlo range of pool pumps have passed all the requirements of AS/NZS 60335.2.41:2004 for safety,
- Captive bolts for easy servicing, no lost fasteners.
| MOTOR | |
|---|---|
| Type | TEFC 2 pole |
| Nominal speed | 2900 rpm |
| IP rating | IP44 |
| Insulation class | Class F |
| Thermal overload | Internal, automatic reset |
| Temperature rise | Class F |
| Frequency | 50Hz |
| Voltage | 230º-240º |
| Bearing type | Deep groove ball bearing |
| Bearing temperature rating | 120ºC |
| MATERIAL | |
|---|---|
| Component | Material |
| Pump casing | Reinforced Polypropylene 40% Glass Filled |
| Impeller | Polypropylene Ether |
| Diffuser | Polypropylene HP TF 40% |
| Yoke | Polypropylene 40% Glass Filled |
| Drain plugs | Polypropylene |
| End shield | SS 303 |
| Strainer basket | Cast Aluminium |
| Strainer basket O-ring | High Impact Polystyrene |
| Strainer pot lid | Low friction nitrile |
| Barrel unions | Makrolon Polycarbonate |
| Base | Copolymer Polypropylene |
| Seal bellows | Nitrile |
| Seal stationary face | Aluminium oxide |
| Seal rotating face | Carbon |
| Seal spring | SS 316 |
