Davey HS60-08T Torrium Pressure System
Robust & compact 3 Stage centrifugal pump with Torrium constant flow control and loss of prime device for automatic water pressure.
Tap Gauge: 5 Taps
Suited to Medium Size Homes.
Ideal for pumping clean, non-volatile liquids without fibres or solids in such applications as Household water supply, Irrigation, Water transfer, Washing systems, Pressure boosting.
As a tap guide – 1 tap = 10 litres per minute *1 sprinkler = 15 litres per minute.
Ideal for pumping clean, nonvolatile liquids without fibres or solids in such applications as:
*Household water supply
*Power -1100W (1.5 HP)
*Single phase with standard NZ 3 pin plug
*Max Flow rate: 110 Litres per minute
*Max Pressure: 72 psi
*Self Priming: 6m Suction
*Max discharge head: 50 metres
*Inlet size: 1¼” inch BSP (32mm)
*Outlet size: 1” inch BSP (25mm)
*Built in thermal overload protection
*Insulation class B
*Liquid temperature range: 1 - 50ºC
*Max operating pressure: 7 bar
* Fitted with an electronic automatic constant pressure control system (provides constant pressure at constant flow)
* Starts automatically when the tap is turned on
* Torrium2® cut-in pressure is normally 80% of the pumps last shut-off head.
* Operates constantly from low flow to full flow
* Stops automatically when the last tap is turned off
* Run Dry Protection
* Corrosion resistant stainless steel construction
* Stainless steel pump housing
* Stainless steel motor shaft
* Built in thermal overload protection
2 Year Warranty