ONGA LTP Leisuretime Pool Pumps
Couldn't load pickup availability
Lowest Price Guarantee
Lowest Price Guarantee
Shop with confidence from Water and Pool Systems. Our volume discounts guarantee the absolute lowest prices.
If you find a lower total delivered price by a licensed and authorized pool supply catalog or website we will refund you the difference.
Shipping and Returns
Shipping and Returns
Place your order online and we will promptly ship it using a secure carrier with tracking.
Satisfaction guaranteed! If you are not completely satisfied, you may make a return for a full refund or replacement within 14 days
Read our Shipping and Returns Policy
ONGA LTP Leisuretime Pool Pumps
ONGA LTP LESUIRETIME POOL PUMPS
The range of Onga LTP Lesuiretime swimming pool pumps has been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost.
Onga LTP750 (1hp) pump is a direct replacement for the previous Onga 661-1 pump
- Ideal for small to medium domestic swimming pools and solar pool heating.
- 2 year warranty
APPLICATIONS:
- Swimming pools from 20,000 litres up to 90,000 litres.
- Solar heating circuits.
- Above ground pools.
FEATURES & BENEFITS
- IP55 (TEFC) motor – with IP55 protection from dust and water the LTP pumps are preserved
- Electrical approvals-the LTP series pool pumps have passed all stringent Australian standards AS/ NZS3136:2001 for safety and is approved for installation within the wetted zone of the pool area, approvals V99108, V02301, V02302.
OPERATING CONDITIONS
Suitable for pumping clean non-aggressive liquids without solids or fibers in suspension.
| Fluid | Water |
| Maximum working pressure | 270 kPa |
| Water (Swimming Pool) temp range | 5ºC-35ºC |
| Ambient temperature | 50ºC maximum |
| MOTOR | |
|---|---|
| Type | TEFC 2 pole continuously rotated |
| Nominal speed | 2800 rpm |
| IP rating | IP55 |
| Insulation class | Class F |
| Thermal overload | Inbuilt auto reset |
| Temperature rise | Class B |
| Frequency | 50Hz |
| Voltage | 230º-240º |
| Bearing type | Deep groove ball bearing with double contact lip seal |
| Bearing temperature rating | 150ºC |
| MATERIAL | |
|---|---|
| Component | Material |
| Pump casing | 20% glass filled with ABS |
| Clacker | 20% glass filled with polycarbonate |
| Impeller | 20% glass filled with ABS |
| Baffle | 20% glass filled with ABS |
| Drain plug | 20% glass filled with ABS |
| Diffuser | 20% glass filled with ABS |
| Basket | Polypropylene |
| Shaft sleeve | Nylon |
| Motor shaft | 400 series stainless steel |
| End shield | Powder coated cast iron |
| Hair and lint pot O-ring | Low friction nitrile |
| Cord/Plug | Nitrile |
| Mechanical seal, 1/2″ type 6 (LTP1100 = type 6 3/4″ | |
| Flexible bellows | Nitrile |
| Stationary face | Ceramic |
| Rotating face | Carbon |
| Spring | 304 stainless steel |
| PUMP MODEL | A (mm) | B(mm) | C(mm) | D (mm) | E (mm) | F (mm) |
|---|---|---|---|---|---|---|
| LTP400 | 556 | 454 | 91 | 152 | 254 | 260 |
| LTP550 | 578 | 454 | 91 | 152 | 254 | 260 |
| LTP750 | 578 | 454 | 91 | 152 | 254 | 260 |
| LTP1100 | 587 | 448 | 91 | 152 | 254 | 260 |
Note: Dimension ‘E’ an additional 160mm clearance height required above the pump to remove strainerbasket for maintenance and cleaning purposes. Unless otherwise specified, all dimensions in mm.Fixing holes accept 8mm fasteners.
